(Lamborghini Countach) Following testing of the LP500 prototype during 1971, Stanzani and his team decided to further revise the chassis design. The dimensions and layout were similar, but the steel sheet and square tube construction used in the prototype was entirely disregarded in favor of a full space frame constructed of welded round-section steel tubing. Compared to the prototype, this design used a much more complex welded assembly of cross-braced tubular frames and was reinforced with sheet metal gussets in a few key areas. Tubes of 30 mm (1.2 in), 25 mm (0.98 in), and 15 mm (0.59 in) diameter were used, all with 1 mm (0.039 in) wall thickness. Overall, this new design was stiffer and weighed less, at 90 kg (198 lb). At the time, this construction technique was used in Formula One but was extremely advanced for a road-going automobile. In addition to the performance benefits of this design, engineers recognized that building a technologically advanced and visually complex chassis would align with Lamborghini’s marketing strategy and sell better than a conventional design. The full space frame chassis was tested in a second Countach prototype and would be used basically unchanged on subsequent production cars. Chassis fabrication added a significant amount to the cost of the car as each chassis required laborious hand-welding, first by Marchesi then again during final assembly at the Lamborghini factory. However, logistically this method of fabrication was relatively easy to incorporate into the low-volume, manually-skilled production line. car backgrounds, lambo wallpaper, lamborghini huracan wallpapers, Lamborghini Countach wallpapers, huracan wallpaper
(Lamborghini Gallardo)The LP 570-4 Edizione Tecnica was based on the LP 570-4 Superleggera and the LP 570-4 Spyder Performante, with a fixed rear wing, carbon-ceramic brakes, roof arch and front air intakes painted in contrasting color schemes (Nero Nemesis (matt black) body with Arancio Argos (orange) pillars and front air intakes, Bianco Canopus (matt white) body with Arancio Argos pillars and front air intakes, and Arancio Argos body with Nero Nemesis pillars and front air intakes).
The vehicles were unveiled at the 2012 Paris Motor Show, followed by the 2013 Shanghai Motor Show (in which a Gallardo LP 560-4 Spyder Edizione Technica in Grigio Telesto paint scheme was unveiled).
The vehicles were available at Lamborghini dealerships from November 2012. Early models include the LP 550-2 (Coup?/Spyder), LP 560-4 (Coup?/Spyder), LP 570-4 (Superleggera/Spyder Performante). Lamborghini Gallardo wallpapers#LamboAventador #Cars #huracan #LamborghiniAventador #gallardo